That pool table you have has been serving your needs for many years. It has finally developed a bit of a worn spot and that last party caused a small rip. This means it is a time to explore your options with a pool table refelting project. There are several decisions to be made and all of them can be exciting.
A small rip can be repaired by you if you have a lot of patience. Careful measurements must be made and the felt will have to be cut exactly right. The proper amount of adhesive will need to used and the area will need to be prepared properly, first. This is a test of your attention to detail as the repair must not interfere with that next game.
One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.
Companies who deal with pool tables and accessories will also offer the refelting needed. They will offer their services to help you see some other possibilities for your table. They will help you make this largest game piece in your room meld with everything else. One of the ways to do this is by their asking you what color of felt you would like to use this time.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
Watching the professionals go to work on your table will help you understand what they are doing and more about this game piece. The measurements will be exacting as will the dismantling of the rails. Removing the felt and old glue will make the way clear for the new piece. Old staples will also be removed so they do not interfere with a proper installation.
That felt piece will be cut to the proper width and length. This will extend past the edge of the slate or bed and allow the staples to hold it onto the surface. A very thin, solid layer of adhesive is applied and the felt is laid over the surface. This is stretched in all dimensions to ensure it is perfectly flat and the staples are applied under the rail location.
The rails are taken apart, very carefully, and covered as well. They are reinstalled and weights are placed on the entire table to ensure a good fir and curing. This should stand, by itself, for about 24 hours as it cures properly. The company will make sure you are satisfied and stop by to deal with any issues. They might also ask you for a game to try it out.
A small rip can be repaired by you if you have a lot of patience. Careful measurements must be made and the felt will have to be cut exactly right. The proper amount of adhesive will need to used and the area will need to be prepared properly, first. This is a test of your attention to detail as the repair must not interfere with that next game.
One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.
Companies who deal with pool tables and accessories will also offer the refelting needed. They will offer their services to help you see some other possibilities for your table. They will help you make this largest game piece in your room meld with everything else. One of the ways to do this is by their asking you what color of felt you would like to use this time.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
Watching the professionals go to work on your table will help you understand what they are doing and more about this game piece. The measurements will be exacting as will the dismantling of the rails. Removing the felt and old glue will make the way clear for the new piece. Old staples will also be removed so they do not interfere with a proper installation.
That felt piece will be cut to the proper width and length. This will extend past the edge of the slate or bed and allow the staples to hold it onto the surface. A very thin, solid layer of adhesive is applied and the felt is laid over the surface. This is stretched in all dimensions to ensure it is perfectly flat and the staples are applied under the rail location.
The rails are taken apart, very carefully, and covered as well. They are reinstalled and weights are placed on the entire table to ensure a good fir and curing. This should stand, by itself, for about 24 hours as it cures properly. The company will make sure you are satisfied and stop by to deal with any issues. They might also ask you for a game to try it out.
0 comments:
Post a Comment